A warm towel keeps the users protected from extreme cold and gives them total comfort. If it is a winter season, after taking a bath, you should definitely use warm towels. It will make you warm and will give you the feel of dryness. This is true that keeping your homemade towel warm is a simple and less costly affair that will help you to stay warm and comfortable.
In this write-up we will discuss about homemade towel warmer. So, if you are interested in this topic, you can go through the points below:
- First drill a small hole, at the cooler’s back wall. Thereafter keep the heated pad flat at the bottom of the cooler and then keep pushing the wire through the back so that there remains no extra wire in the cooler. After everything gets over, you should not waste any more time to tape the hole using masking tape.
- After this, you need to pour urethane rubber in the hole. This is because; it makes the sealing perfect. Now, for the maintenance of safety, package instructions need to get followed.
- Then for creating a rough surface, you should sand the cooler. You can paint the cooler using your favorite colors. But make sure, the color you have chosen for this purpose will look good on plastic.
- Finally, plug the pad and turn it high. After this, place all your towels inside that cooler and close the cover until they get totally warm.
So, if you also have a planning to develop homemade towel warmer, these points are surely going to help you out in your mission.
You may also like to read refrigerator thermostat.
