There have been many discussions in the press and in scientific journals as to the problems with groundwater contamination and its effects on human health and the environment. A large number of water treatment plants have been built over the past 50 years or so, but many of these are only designed to mask the problems rather than actually solving them. The problem of groundwater contamination has been highlighted by increasing reports of contaminants entering the lakes, rivers and aquifers of the world.
There are a number of ways in which to prevent groundwater contamination, although not all of these methods will be suitable for every situation. How to prevent groundwater contamination? The first thing that needs to be done is a detailed analysis of the present sources of contamination, both above and below ground. This needs to take into account such things as industrial and household waste, pesticides and herbicides, among other chemicals. It also needs to take into account any potential degradation in the quality of the soil due to human activities, such as draining and run-off from landfills. For Land Remediation Services, visit Soilfix
If the current sources of contamination are found to be unacceptable, then steps should be taken to remove and dispose of any contaminated sediments and surface water. This will involve the use of membranes such as submersible filters, and tanks which can be sealed and locked at a depth of six inches or more.